PLC programming for a new machine
We bring the operating sequence, sensors, motors and pneumatic movements into one control structure. Machine builders can work with us on the PLC program and HMI software together.
Başakşehir · Istanbul / Across Türkiye
PLC programming. For your machine.
Need a program for a new machine, a change to an existing process or a clearer operator screen? We develop PLC and automation software for your equipment. You do not need to buy the machine from us.
Tell us about your machineA photo of the PLC model label is a useful starting point.
What does your machine need?
Software changes to existing machinery
A new product, a different fill volume, an additional station or a revised sequence: we review the existing program and hardware before planning the required automation changes.
HMI screens and product recipes
We develop product recipes, settings, alarm explanations and machine-status screens for the operator touchscreen. The PLC controls the operating sequence; the HMI makes that process understandable to the operator.
Controller selection and supply
If you do not yet have a PLC, we can establish the I/O, communication and expansion requirements together. We can source a suitable PLC and HMI, prepare the software and ship the hardware to you.
Which PLC are you using?
Our PLC programming service is independent of the controller brand. We can assess projects using new or existing controllers from Samkoon, Siemens, Delta, Mitsubishi, Omron and other manufacturers.
-
Samkoon
PLC · HMI + PLC
-
Siemens
SIMATIC S7-1200 · S7-1500 · S7-300/400
-
Delta
DVP · AS · AH
-
Mitsubishi Electric
MELSEC FX · iQ-F · iQ-R
-
Omron
CP · CJ · NJ · NX
-
Schneider Electric
Modicon M221 · M241 · M251 · M262
-
Allen-Bradley
Micro800 · CompactLogix · ControlLogix
-
LS ELECTRIC
XGB · XGT / XGI / XGK
-
FATEK
FBs · B1
Other manufacturers and control platforms
We can also work with manufacturers such as Kinco, Inovance, Wecon, Beckhoff, WAGO, B&R, Panasonic, Keyence, Phoenix Contact, Festo, ABB, Eaton and Hitachi. Projects using CODESYS-based controllers can also be considered.
Cannot see your model here? Send a photo of its CPU or model code. We will establish the programming environment, necessary licences and access to the existing project for that specific controller.
Whatever its manufacturer.
We can develop software for liquid filling, powder filling, bottom-up filling, vertical packaging and horizontal packaging machinery. For other production machines, share the operating sequence, connected equipment and the change you need.
Software can be a standalone service. If PLC or HMI sourcing is also required, we can define that as a separate part of the project.
Outside Istanbul?
We can still work together.
Alongside machine builders and businesses in Başakşehir and Istanbul, we work on projects across Türkiye. Where the project allows, you can ship your PLC or HMI to us for programming and receive it back afterwards.
If you do not have the hardware, we can source the PLC and send it with the program loaded. Shipping, deliverables and the machine-side testing arrangements are agreed before work starts.
Loading a program into a controller and testing the connected machine on site are separate steps. We establish which steps your project needs at the outset.
How the project works
-
Show us the machine
Describe what the machine does and what should change. A short video, a PLC/HMI label photo and available electrical drawings help with the initial assessment.
-
Define the scope
We discuss the sequence, screens, recipes, drives and communication requirements. Software work, hardware sourcing and testing are defined separately.
-
Develop the software
We prepare the PLC program and, where needed, HMI screens. The installed hardware and project conditions determine the control structure and the preliminary tests that can be carried out.
-
Agree delivery and testing
We plan program loading, the agreed project files and machine tests. For work by shipment, we also agree dispatch and return delivery arrangements.
Before we start
Can you program a machine that was not supplied by Kedi Machine?
Yes. We provide PLC programming, HMI design and automation software for machinery you build yourself or buy from another manufacturer. A machine purchase is not required.
Do you work with all PLC brands?
We assess projects without restricting enquiries to a particular brand. For Samkoon, Siemens, Delta, Mitsubishi, Omron, Schneider Electric and other controllers, we review the CPU model, engineering software, licences and project access before confirming the scope. Send the model code to get started.
Can I ship a PLC from another city for programming?
Yes, where the project is suitable. You can send the controller and receive it back after programming. We first agree the machine connections, testing requirements and project files to be delivered.
Can you supply the PLC and HMI too?
Yes. We can select the PLC, I/O modules and HMI around the machine’s requirements, source the hardware and prepare the software. The model, supply conditions and software scope are confirmed during quotation.
What if the existing program backup is missing?
We first review the controller model and the files that are available. An editable source project cannot always be retrieved from the device. Using the operating sequence and electrical drawings, we can assess whether modification or a new program is appropriate.
What affects the cost of PLC programming?
The operating sequence, I/O, drives, communication, HMI screens, recipes and testing requirements determine the scope. Hardware sourcing and shipping are identified separately where needed. A model label and short operating video help us assess the work.
Thank you. We’ll be in touch.